null Skip to main content

250/80 Unlimited Injectors and CNC Fab stage 2 HPOP

$3,059.00
(No reviews yet) Write a Review
SKU:
25080cnc2
Adding to cart… The item has been added

These are the ultimate towing/street/strip Stage 3 Powerstroke fuel injectors by Unlimited Diesel with 250cc and 80%  Nozzles! These injectors are capable of 500+ RWHP, but can also be detuned to tow heavy loads with EGT’s less than 1250*F sustained! This is a great choice for someone who has installed an upgraded turbo. Even with the size of these diesel fuel injectors, dual high pressure oil pumps are still not a requirement with proper tuning. Head studs are recommended if you are planning on running over 40 psi of boost. Fuel pressure should be checked also to ensure at least 60 psi. Custom tuning required for optimal performance. Fits1994-2003 7.3L Powerstroke Diesel engines.

Each Unlimited Diesel Performance Powerstroke fuel injector:

  • Includes NEW Tungsten coated Plunger & Barrel assemblies
  • Includes NEW Nozzles
  • Has o-rings replaced, and new nozzle springs installed
  • Solenoids are all inspected for proper resistance
  • Cores thoroughly cleaned using a Pro Ultrasonics cleaning unit for a super clean injector body.
  • Injector clearances reset to proprietary specs
  • Is bench tested at a full range of RPMS and oil pressures
  • Is backed by Unlimited Diesel's limited lifetime warranty

Common Issues that require Powerstroke fuel injector replacement:

  • Plugged Nozzles
  • Blowby from Nozzle Pintle
  • Scored Plungers and Barrels
  • Broken Plunger Spring
  • Broken Nozzle Spring
  • Blown Internal Orings
  • Blown External Orings
  • Scored Poppet Valves
  • Worn Armature Clearances
  • Armature contacting solenoid
  • Loose adapter plate screws
  • Loose armature screw
  • Shorted/open solenoid

 

*Fuel injectors are sold in sets of 8. Call for single fuel injector pricing. We use ONLY New Alliant Power External Orings, beware of cheap orings. We have had multiple customers call us with competitor products using inferior orings that have failed.

 

 

CNC FABRICATION 7.3L STAGE 2 HIGH PRESSURE OIL PUMP FOR MODEL YEARS 1994.5-1995

Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can be ran with this pump, but it is not a guarantee that it will keep up in a "hot/race" tune as there are variables between injector builders on how well they build them.

This pump is more recommended for 230-250cc hybrid injectors.  Anything larger will more than likely require a larger pump setup. 

  • Comes with a new gasket
  • 30% more flow over 99.5-03 stock pump (10-12% more than an Adrenaline HPOP)
  • All of our pumps are fitted with steel thread inserts to ensure the threads will not rip out
  • Upgraded internals for more flow
  • New Viton o-rings to reuse your existing fittings
  • Every pump is flow bench tested to assure you no DOA pumps.
  • Comes with a test flow result sheet
  • 1 Year Warranty