Commonly called a Stage 3, these "Super Street" 250cc hybrid injectors will typically produce around 550-600hp with proper supporting modifications depending on the year of your truck. 100% nozzles will give better towing capabilities and run cleaner, 200% nozzles will give the most power but expect EGT's to be higher. This size of injector is where you will want to seriously think about bottom end engine work done, like billet rods and a plate girdle. Not recommended for heavy towing.
Features:
- Great for towing, or just wanting a mild power increase
- New nozzles
- New Tungsten Coated Plungers and Barrels
- New o-rings
- New springs
- Better than OE specifications
- We do NOT use shims, these injectors are machined to set proper armature clearance
- Each set of injectors will come with flow sheet test results
- Tested on the newest Hartridge flow bench using the latest injector technology
- Free Ground Shipping with a return label
Warranty:
Covered by CNC Fabrication's limited lifetime warranty. Warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed. Warranty VOID if damage is done due to improper care of the purchaser's vehicle, improper fuel, etc. Warranties are non-transferable, and only offered to the original purchaser.
