Commonly called a stage 3 or stage 4, these "Street Comp" 300cc hybrid injectors mean business, and will typically produce around 650+hp with proper supporting modifications. 200% nozzles will give better towing capabilities if you do end up towing here and there. This size of injector is where you will need bottom end engine work done, like billet rods, balancing, and a plate girdle. Not recommended for towing.
Features:
- Great for towing, or just wanting a mild power increase
- New nozzles
- New Tungsten Coated Plungers and Barrels
- New o-rings
- New springs
- Better than OE specifications
- We do NOT use shims, these injectors are machined to set proper armature clearance
- Each set of injectors will come with flow sheet test results
- Tested on the newest Hartridge flow bench using the latest injector technology
- Free Ground Shipping with a return label
Warranty:
Covered by CNC Fabrication's limited lifetime warranty. Warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed. Warranty VOID if damage is done due to improper care of the purchaser's vehicle, improper fuel, etc. Warranties are non-transferable, and only offered to the original purchaser.
